Focus Banners Logo
Close this search box.
Toggle Ties

Banner Toggle Ties

Looking for a cable tie replacement for installing banners?

Try our reusable toggle ties. 10cm or 15cm cords.

Save massive time in bump in/out.

Save cable ties ending up in landfill

Made from recycled polypropylene

100 per pack


Product Info

Banner Toggle Ties

Banner toggle ties are a reusable replacement to cable ties.  They can be reused countless times, keeping non-recyclable nylon out of landfill. We started ranging this product when Ironman asked us to find a solution to the 2 x 240L council bin of cable ties they discarded each Noosa Triathlon. The results were better than expected as not only was the waste eliminated but there were other hidden benefits.

Toggle ties speed up bump in and out times by up to 75% because of their ease of installation and removal. Simply loop through the eyelet and frame and attach the loop of the bungee cord around the ball. The tie is self tightening so no need to worry about pulling the cable tie together and trimming the tab end. The banner moves with the wind because of the flexibility in the tie so banners crease less than with cable ties.

If you have single sided banners or corflute the ball can be hidden on the back side creating a very clean finish.

If you have any questions about toggle ties please call us on 1800 781 814

See Also: Reusable Cable Tie

How to use Banner Toggle Ties

Elastic toggles ties are perfect for quick bump in and outs. They are self tightening and can be removed very easily. No more cutting cable ties off with a knife. We have seen so many banners damaged using that method.

To use the toggle tie, simply insert the cord loop through the eyelet, bring the cord over the top of the bar the banner will attach to, and thread the ball through the loop. It will tighten automatically. The ensure that the ball is spun around to the back side of the banner, preferably under the bar it is attached to.

Toggle ties will take a lot wind. They self adjust to the level of wind ensuring an even installation every time.

To remove them, simply push the ball back through the loop and store the tie on your wrist or tool belt. The process is so much faster than cutting cable ties, and creates zero waste.

Additional Information


10cm for Crowd Control Barriers, 15cm for Temporary Fences

Key benefits

Banner Toggle Ties

  • Banner Toggle Ties are reusable thousands of times over. They save hundreds of dollars on cable ties over their lifetime.
  • Eliminate waste from cable ties made from unrecyclable nylon. Swap  single use for infinite use.
  • Banner toggle ties are self tightening and easily installed and removed. This saves countless hours on bump in and outs that might be spent better elsewhere.
  • Banners look better with them. Unlike cable ties which pull and crease when over tightened, toggle ties are made with bungee cord that tightens as needed. Great in the wind.
  • Councils can promote zero waste events and hire out their stock of ties to local events. A win for the environment, a win for the council and a win for the event organisers.
  • Don’t risk damaging branding collateral with removing cable ties with a knife. Toggles just slip straight off.
Banner Toggle Ties


Polyester Mesh Banner


An infinite number of times. Toggle ties will outlive the events they are used for.

The latex cord is made from virgin latex and polyester. The ball is made from 100% recycled polypropylene.

Toggle ties are probably best used for short term applications. Their cost and ease of removal doesn’t suit long term installations.

Toggle ties are easy to remove. If you are worried about losing your branding then we suggest using one or two cable ties in combination with the toggles to deter theft.