To install banner mesh on temporary fencing or cyclone wire fencing follow these steps for a crease-free installation:

1. Identify the starting point of the mesh banner and take the banner out of its packaging.
2. Leaving it on the roll, attach the top corner loosely with a cable tie.
3. On flat installs, ensure the top row is straight and start fixing every second eyelet with cable ties.
4. Work for 5-10 metres along the top row before coming back to fix the bottom row. Ensure that the banner is not overly taut and that there is a small amount of play in the cable tie. This will prevent pulling and creases.
5. Repeat step 4 until the end of the banner. Then fix the side eyelets, and any missing eyelets along the top and bottom rows. It is important to use all the eyelets to disperse the wind drag as evenly as possible.
6. Adjust any cable ties which are too tight. You may need to replace them.
7. Snip the tag ends of the cable ties and roll the lock to the rear of the banner for a clean finish.