Crowd Control Barrier Banners
Printed crowd control barrier banners.
Custom made with polyester mesh.
Span one or multiple CCBs
Lightweight, Easily stored and transported
- How to Install
- Product Info
Crowd Control Barrier Banners
Crowd control barrier covers are ideal branding mediums for events. CCB covers are visually outstanding with the ability to print high resolution detailed images with photo like results.
To make the distinction between our other products, these are single sided print and made of polyester. Banners are ideal when one side of the cover will be covered by the audience.
Focus Banners make our printed crowd control banners from polyester mesh which means they are lightweight and very easy to install with cable ties. Our printed barrier fence covers are also very as easy to remove and store. Polyester is a fabric which does not wrinkle very much so CCB covers can simply be folded into in small form and stored in a box until the next event.
We sew a reinforced hem and then adding eyelets every 500mm on our CCB banners. The covers are made to sit just inside the metal framework of the barrier ensuring a very tight fit of perfect size. We also cut the upper corners on an angle to allow for the curved corners of the barrier.
Using polyester mesh allows even the strongest winds to pass safely through the crowd control fence alleviating a potential hazard. The covers also mean that limbs and other body parts of spectators are not poking through the barriers making it safer for everyone.
How to Install
How to Install a Crowd Control Barrier Banner
CCB banners or single sided covers are the same thing. They come with eyelets.
To install CCB banners:
- Position the banner in the corner you want to start from
- Attach a cable tie or toggle tie
- Extend the banner to its full length and tie the top last corner into place loosely
- Go back and attach all the top and bottom eyelets
- Adjust the tension by easing the ties so the banner sits straight.
Single SIded CCB Covers
Single sided covers are ideal when the audience is only looking at one side of the CCB, when audiences are directly behind them for example. Think of the last 100m of a race.
CCB covers of this type are generally made from polyester mesh for performance in the wind and also lightness in installing.
We recommend pairing them with our reusable toggle ties. Not only from the perspective of saving on cable tie waste but toggle ties reduce bump in and out times significantly. They do not damage covers when removed like wielding a knife to remove cable ties can.
Single sided CCB covers can also come in PVC mesh which can last two years outdoors. The downside is the weight and storage space required.
Q. What is a CCB Banner?
A. We consider a CCB banner to be a single sided, polyester banner which spans one or more CCBs.
Q. How long can a CCB banner be?
A. For ease of handling we recommend no more than 20m long.
Q. How high should a CCB banner be?
A. Ideally the banner will go from the top of the CCB to the bottom rail. This allows wind to pass under the CCB as well as through.
Q. Are CCB banners cheap?
A. CCB banners are one of the cheapest ways to cover a crowd control barrier with advertising.